Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
ELECTRICAL SPECIFICATIONS
Input
Input voltage range: 90 to 264 VAC or 127 to 350 VDC
Frequency: 47 to 63 Hz (360 to 400 Hz with higher leakage)
Inrush current: 50 Apk, cold start
Leakage current: <300 µA (using UL test method)
No load power: < 500 mW
Output
Output Voltage: 24V
Vout Adjust Range (-0% / +15%): 24-27.6V
Minimum Load: 0 A
Max. Continuous Load (Free Air): 27.1 A
Max. Peak Load (Free Air): 31.3 A
Max. Continuous Load (Forced Air): NA
Max. Peak Load (Forced Air): NA
Regulation: ±2%
Ripple (p-p): 240 mV
Maximum power: 650 W, forced-air cooling (750 W peak); 400 W, free-air natural convection cooling (650 W peak)
Adjustment range: -0% to +15%
Holdup time: 20 ms @ 400 W
Fan output: 12 V @ 1.0 A (forced air); 12 V @ 0.5 A (natural convection)
Standby output: 5 V @ 2.0 A (forced air); 5 V @ 1.0 A (natural convection)
Control and Protection
Serial bus interface: PMBus®
Current share: Active
Remote sense: 2-wire (+ and -)
Remote inhibit: Pull inhibit low = main & fan output OFF (5 V standby is ON); Pull inhibit high (or floating) = all outputs ON
AC OK: Active high when normal AC input is present (with internal 10 kOhm pull up to 3.3 V)
DC OK: Active high when main O/P is within regulation (with internal 10 kOhm pull up to 3.3 V)
Smart fan control: Monitor, control and override
Overvoltage protection: Latch (AC recyle or inhibit toggle required for PSU restart)
Overload protection: Auto-recovery (constant current mode down to 50% Vout)
Overtemperature protection: Auto-recovery with hysteresis
ENVIRONMENTAL SPECIFICATIONS
Operating temperature: -20 °C to +80 °C (derate at 50 °C), startup at -40 °C
Storage temperature: -40 °C to +85 °C
Operating humidity: 5% to 95% (non-condensing)
Non-operating humidity: 5% to 95% (non-condensing)
Maximum altitude: 5000 m (3000 m for medical), derating may apply
OTHER SPECIFICATIONS
Isolation: 4000 VAC (input to output); 1500 VAC (input to PE, output to PE)
Line harmonics: EN 61000-3-2, Class A
ESD immunity: EN 61000-4-2, ±15kV (air) / ±8kV (contact) - Criterion A
Conducted EMI Level B, CISPR 22 and FCC Part 15
Radiated EMI: Level B, CISPR 22 and FCC Part 15 (with cover)
Surge immunity: EN 61000-4-5, Level 3 - Criterion A, Level 4 - Criterion C
Medical EMC: EN 60601-1-2: 2014 (cover maybe required for some tests)
MTBF (Telcordia, Issue 3, Method 1, Case 3): > 950 KHrs, 25 °C, 410 W natural convection; > 1.3 MHrs, 25 °C, 650 W forced air
