Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
- Output Power: 10 kW max at full rated output voltage and current
- Output Voltage: The OLS10K offers output voltages up to 100 kV.
- Output Current: Up to 10 A for 1 kV and 100 mA for 100 kV
- Input Voltage: 400 VAC ±10% (360 ~ 440 VAC) 47 ~ 63 Hz, 3 phase plus protective
earth
- Input Current: < 22 A per phase
- Voltage Ripple: Voltage Mode: < 0.1% of rated voltage +2 V, peak to peak or < 0.02% of rated voltage
+1 Vrms
- Voltage Ripple: Current Mode: < 0.5% of rated voltage peak to peak
or < 0.1% of rated voltage rms
- Line Voltage Regulation: < 0.01% +0.5 V change in output voltage for a 10% change in line voltage
- Load Voltage Regulation: < 0.01% +0.5 V change in output voltage for 0 ~ 100% change in load current
- Line Current Regulation: < 0.5% of rated current
- Load Current Regulation: < 0.5% of rated current for 0 ~ 100% change in output
- Polarity: Positive or negative to order
- Specification Range: Specifications apply above 5% of rated output voltage. The output can be controlled down to < 0.25% of rated output voltage.
- Calibration: Calibration between voltage demand, output voltage, and voltage monitor ±0.2% of setting or ±0.05% of rating, whichever is greater
- Recovery Time: < 200 ms to within 0.1% of previous operating level following a short circuit or arc. Max overshoot 2% of rated output voltage.
- Temperature Coefficient: < 100 ppm/°C
- Drift: < 0.01% per hour after 1 h warmup, typically < 0.02% per 8 h after 1 h warmup, at constant load, line, and temperature
- Operating Temperature: 0 ~ 40°C (32 ~ 140°F)
- Storage Temperature: -20 ~ 70°C (-4 ~ 158°F)
- Humidity: 80% max relative humidity up to 31°C (88°F), reducing linearly to 50% at 40°C (104°F). Non-condensing
- Altitude: Sea level to 2000 m (6500')
- Installation Category: II (BS EN61010-1)
- Pollution Degree: 2 (BS EN61010-1)
- Usage Indoor use only
- Interface:
Analog remote control interface as standard, control is via a 25-way female D-type connector
Optional digital RS232 remote control, 9-way female D-type connector available
- Dimension (W x D x H):
Up to 80 kV: 43 x 51.6 x 26.6 cm3 (17 x 20.3 x 10.5 in3)
Over 80 kV: 43 x 61.4 x 26.6 cm3 (17 x 24.2 x 10.5 in3)
- Weight: 45 kg (99 lb)
- Accessories: OLS10K 3M HV Cables, OLS10K 5M HV Cables, OLS10K 10M HV Cables
