Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Input
Input: voltage range 90 - 264 Vrms
Frequency: 47 - 63 Hz (360 - 440 Hz with higher leakage)
Inrush current: 70 Apk, < 1 ms, cold start
Efficiency: 93% typical
Leakage current: Specified for medical approvals
No load power: < 500 mW
Output
Maximum power:
250 W, forced-air cooling
155 W, free-air natural convection
Adjustment range: -0% / +10%
Holdup time: 10 ms @ 225 W
Fan output: 12 V @ 500 mA
Standby output: 5 V @ 100 mA (For CPS253-M1 only)
Control and Protection
Remote On/Off: For CPS253-M1 only
DC OK: For CPS253-M1 only
Overvoltage protection: Latching/AC Recycle required to restart PSU
Overcurrent protection: Auto-recovery
Short circuit protection: Auto-recovery (impedance <50 mOhm
Overtemperature protection: Auto-recovery with hysteresis
Environmental Specifications
Operating temperature: -20 °C to +70 °C (derate at 50 °C), startup at -40 °C
Storage temperature: -40 °C to +85 °C
Operating humidity: 5% to 90% (non-condensing)
Non-operating humidity: 5% to 95% (non-condensing)
Maximum altitude: 5000 m (3000 m for medical), derating may apply
Ordering Information
Output voltage: 12 V
Minimum load: 0 A
Max. Continuous Load (Free Air): 12.92 A
Peak Load (Free Air): 15.5 A
Max. Continuous Load (Forced Air): 20.83 A
Regulation: ±2%
Ripple (p-p): 120 mV
