Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Input
Input range: 85 - 264 Vac (wide range); 120 - 300 Vdc
Frequency: 47 - 440 Hz
Inrush current: < 18 A peak @ 115 Vac; < 36 A peak @ 230 Vac, cold start @ 25°C
Input current: 1.5 A max. (RMS) @ 115 Vac
Efficiency: 70% typical at full load
EMI filter: FCC Class A conducted; CISPR 22 Class A conducted EN55022 Class A conducted; VDE 0878 PT3 Class A conducted
Safety ground leakage current: < 75 μA @ 50/60 Hz, 264 Vac input
Output
Maximum power: 60 W for convection; 80 W with 30CFM forced air
Adjustment range: -5, +10% minimum
Hold-up time: 20 ms @ 60 W load, 115 Vac nominal line
Overload protection: Short circuit protection on all outputs. Case overload protected @ 110% to 145% above peak rating
Overvoltage protection: 5V output; 5.7 to 6.7 VDC. Other outputs 10% to 25% above nominal output
Remote sense: Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected.
Environmental Specifications
Operating temperature: 0°C to 50°C ambient derate each output at 2.5% per degree from 50°C to 70°C, -20°C start up.
Electromagnetic susceptibility: Designed to meet IEC61000-4-2, -4-3, -4-4, -4-5, -4-6, Level 3
Humidity: Operating; non-condensing 5% to 95% RH
Vibration: Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75 G peak 5 Hz to 500 Hz, operational
Storage temperature: -40°C to +85°C
Temperature coefficient: ±0.04% per °C
MTBF demonstrated: > 550.000 hours at full load and 25°C ambient conditions
Ordering Information
Output Voltage: 12 V
Minimum Load: 0 A
Maximum Load with Convection Cooling: 5 A
Maximum Loadwith 30CFM Forced Air: 6.7 A
Peak Load: 7.5 A
Regulation: ±2%
Ripple P/P(PARD): 120 mV
