Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Input
Input range: 90 - 264 Vac; 127 - 300 Vdc
Frequency: 47 - 63 Hz
Inrush current: 50 A max., cold start @ 25°C
Efficiency: 82% typical at full load
EMI/RFI: FCC Class B conducted; CISPR22 Class B conducted; EN55022 Class B conducted; VDE0878PT3 Class B conducted
Safety ground leakage current: 275 µA @ 50/60 Hz, 264 Vac input
Output
Maximum power: 130 W with 200 LFM forced air
Adjustment range: All outputs adjustable: -20%, +10%, except for +24V output on LPT104-M which will be -10%, +20% and 3.3 V output on the LPT101- M +10%, -15%
Hold-up time: 10 ms @ 130 W load, 120 Vac input
Overload protection: Short circuit protection on all outputs. Case overload protected @ 110 - 160% above rating for V1 & V2, 150 - 250% for V3
Overvoltage protection: 15 - 35% above nominal output
Logical Control
Power failure: Active LowTTL logic signal goes high 100 - 500 msec after main output; it goes low at least 6 msec before loss of regulation
Remote sense: Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected
Environmental Specifications
Operating temperature: 0°C to 50°C ambient derate each output as 2.5% per degree from 50 °C to 70 °C. -20°C start up
Storage temperature: -40°C to +85°C
Electromagnetic susceptibility: Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3
Humidity: Operating; non-condensing 10% to 90% RH, non-operating, non-condensing 10% - 95%
Vibration: IEC68-2-6 to the levels of IEC721-3-2
MTBF calculated: 583.000 hours at full load and 25 °C ambient conditions. 230 Vac input, Bellcore
Ordering Information
Output: Triple
1.
Output Voltage: +5 V
Minimum Load: 0 A
Maximum Load with 30CFM Forced Air: 18 A
Peak Load: 20 A
Peak Load: ±2%
Ripple P/P (PARD): 50 mV
2.
Output Voltage: +15 V
Minimum Load: 0 A
Maximum Load with 30CFM Forced Air: 17.2 A
Peak Load: 8 A
Peak Load: ±5%
Ripple P/P (PARD): 150 mV
3.
Output Voltage: -15 V
Minimum Load: 0 A
Maximum Load with 30CFM Forced Air: 1.5 A
Peak Load: 2 A
Peak Load: ±5%
Ripple P/P (PARD): 150 mV
