Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Accessories: ; User Manual (CD) x 1; AC Power Cord x 1, USB Cable, Output terminal cover, Basic Accessory Kit, Test leads: 1x red, 1x black
Rated Output Voltage: 800V
Rated Output Current: 2.88A
Rated Output Power: 720W
Power Ratio: 3.2
Constant Voltage Mode
Line Regulation mV 403
Load Regulation mV 405
Ripple and Noise p-p mV 200
r.m.s mV 30
Temperature coefficient ppm/°C 100ppm/°C of rated output voltage,after a 30 minute warm-up.
Remote sense compensation voltage V/wire 1
Rise Time: Rated Load ms 150
No Load ms 150
Fall Time Rated Load ms 300
No Load ms 2000
Transient response time: 2ms
Constant Current Mode :
Line regulation mA 7.88
Load regulation mA 7.88
Ripple and noise r.m.s mA 10
Temperature coefficient ppm/°C 200ppm/°C of rated output current, after a 30 minute warm-up.
Protection Function
OVP Setting range V 20-880
Setting accuracy ± (2% of rated output voltage)
OCP Setting range A 0.288-3.168
Setting accuracy ± (2% of rated output current)
Over temperature protection (OTP): Turn the output off.
Low AC input protection (AC-FAIL): Turn the output off.
Power limit (POWER LIMIT)
Operation Over power limit.
Value (fixed) Approx. 105% of rated output power
Front Panel
Display, 4 digits
Voltage accuracy 0.1% + mV 400
Current accuracy 0.1% + mA 4
Programming and Measurement (Interface)
Voltage programming accuracy 0.1% + mV 400
Current programming accuracy 0.1% + mA 4
Voltage programming resolution mV 14
Current programming resolution mA 1
Voltage measurement accuracy 0.1% + mV 400
Current measurement accuracy 0.1% + mA 4
Voltage measurement resolution mV 14
Current measurement resolution mA 1
Input Characteristics: 800V
Nominal input rating: 100Vac to 240Vac, 50Hz to 60Hz, single phase
Input voltage range: 85Vac ~ 265Vac
Input voltage range: 47Hz ~ 63Hz
Maximum input current
100Vac: 10A
200Vac: 5A
Inrush current:< 50A for 720W
Maximum input power:1000VA
Power factor
100Vac: 0.99
200Vac: 0.97
Efficiency
100Vac: 80%
200Vac: 82%
Hold-up time: 20ms or greater
Analog Programming and Monitoring
Series and Parallel Capability PSW 800V
Parallel number Units 3
Series Number Units none
USB: TypeA: Host, TypeB: Slave, Speed: 1.1/2.0,
USB Class: CDC(Communications Device Class)
LAN: MAC Address, DNS IP Address, User Password,Gateway IP Address, Instrument IP Address, Subnet Mask
GPIB: Optional: GUG-001 (GPIB to USB Adapter)
General Specifications
Weight (main unit only): Approx. 5.3kg
Dimensions (WxHxD): 142×124×350mm
