Litepoint IQxstream Multi-DUT Cellular Test System

Datasheet

Brochure

IQxstream® is a multi-device cellular communication test solution for precise calibration and verification of 2G/3G/4G smart devices like smartphones, tablets, data cards, cellular modules and small cell base stations.

IQxstream’s flexible architecture makes it highly suitable for high volume manufacturing test environments.

Comprehensive Mobile & IoT Test Coverage

Supports a continuous frequency range between 400 MHz and 3800 MHz

Provides physical layer non-signaling test coverage for LTE-Advanced / LTE-Advance Pro devices and IoT modules.

Supports physical layer TX and RX measurements for 3G and 4G small-cell devices.

Supports arbitrary waveform playback into the DUT for uplink signal analysis

Facilitates waveform-based Navigation test

Flexibility to Meet Your Needs

Available in two hardware configurations (5-port and 10-port) for single device, multi-device, and/or MIMO testing

Asynchronous Parallel Test (APT) mode enables device testing that can start and stop independently of other devices in the same test station

The one-box design reduces external cabling to provide a simplified and highly reliable solution for production test

Cellular, IoT and Connectivity Technology Options

LTE TDD / FDD

LTE-Advanced

W-CDMA HSPA / HSPA+

CDMA / CDMA2000

TD-SDCMA

GSM / EDGE

LTE IoT UE categories Cat 1, Cat 0 (Cat M1) and Cat NB1 (NB-IoT)

WCDMA Small Cell (Femtocell, Picocell)

LTE Small Cell (Femtocell, Picocell)

Wi-Fi, 802.11a/b/g/n

Wi-Fi, 802.11af

Bluetooth, Classic (1.x, 2.x, 3.0), Low Energy (4.0, 4.1, 4.2) and Bluetooth 5

Zigbee, Z-Wave and Wi-SUN

DECT

LTE

LPWAN, Sigfox / LoRa

Navigation (carrier-to-noise): GPS, GLONASS, Compass

When & Where to Use the IQxstream for Testing?

In manufacturing environments

For products in the PCB-level manufacturing, RF modules or end-of-line manufacturing lifecycle stages

For mobile or IoT devices