Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Temperature
Working temperature range from 5°C (at least 20 below ambient temperature) to +90°C
Setting temperature range from +5°C up to +90°C
Resolution of display for actual values: 0.1°C
Resolution of display for setpoint values: 0,1°C
Pressure (Vacuum)
Vacuum range: 5 to 1100 mbar
Pressure control: Digital electronic pressure control for a speed-controlled vacuum pump. Tubing for vacuum, air and inert gas are made of material 1.4571 (ASTM 316 Ti). Programmable, digitally controlled inlet for air.
Permitted final vacuum: 0.01 mbar
Maximum leakage rate: 0.01 bar/h
Pump control: speed control, optimised rinsing procedures for the pump membranes as well as signal output for pump ON/OFF
Connection: Vacuum connection with small flange DN16, and gas inlet with fresh air supply
Control technology
adjustable parameters: temperature (Celsius or Fahrenheit), pressure (vacuum), programme time, time zones, summertime/wintertime
Language setting: German, English, Spanish, French, Polish, Czech, Hungarian, Italian
ControlCOCKPITTwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT: the process time does not start until the set temperature is reached
Communication
Interface: Ethernet LAN, USB
Documentation: programme stored in case of power failure
Programming: AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
Safety
Temperature control: mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
AutoSAFETY: additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature
Autodiagnostic system integral fault diagnostics for temperature control
Alarm: visual and acoustic
Heating concept
Thermoshelves: 1 connection for thermoshelves in the rear
VO cooling: Peltier cooling unit ensures a surface temperature distribution with a maximum deviation of ±1 K across the entire temperature range
VO direct heating: fuzzy-supported MLC (Multi-Level-Controlling) microprocessor controller adapting its performance to the volume (local temperature sensing)
Standard equipment
Works calibration certificate for +10°C/20 mbar
Interior: additional interior mountings of stainless steel, material 1.4404.
Interior: all tubings made of stainless steel, material no. 1.4571
Internals: Cooling- and heating-combination of aluminium, material 3.3547 (ASTM B209), with integrated cooling circuit as well as large-area heating including local temperature sensing (Pt100, 4-wire-circuit); individual overtemperature protection. Further data see stainless steel interior.
Stainless steel interior
Volume: 49 l
Dimensions w(A) x h(B) x d(C): 385 x 385 x 330 mm
Max. loading of chamber20 kg
Textured stainless steel casing
Door: full-sight glass door, inside spring-loaded, 15 mm thick glazed panel in safety glass, outside with anti-splitter screen
Dimensions w(D) x h(E) x d(F): 550 x 687 x 430 mm (d +38mm door handle)
Housingrear zinc-plated steel
Electrical data
Voltage: 230 V, 50/60 Hz
Electrical load: approx. 500 W
Ambient conditions
Ambient temperature: +5 °C to +40 °C
Humidity rh max. 80 %, non-condensing
