Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Accuracy: ± 1 %
Compliance: CE
Calibration: NIST 10-Point Certificate
Switch Type: SPDT NO/NC, Selectable
Display Type: None
Accuracy Note: ± 1% of FS at calibration temperature and pressure
Output Detail: Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output)
Output Signal: Current, Voltage
Repeatability: ± 0.15%
Response Time: 2 sec
Switch Rating: 30 Vdc, 1A
Data Interface: RS232
Humidity Range: Up to 70%
Supply Voltage: 11 to 26 Vdc
Turndown Ratio: 50:1
Electrical Output: 4 to 20 mA, 0 to 5 Vdc
Enclosure Ratings: Inst. Level II/Poll. Degree II (IEC 60664)
Materials, Wetted: 316 Stainless Steel, Aluminum, Brass, FKM
Power Consumption: 2.4 W
Supply Power Note: Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise
Pressure Drop, Max: 0.18 psi
Response Time Note: 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow
Media Compatibility: Air, Gases, Nitrogen, Oxygen
Altitude Sensitivity: Deviation of up to 1% from stated accuracy, after re-zeroing
Pressure Coefficient: 0.01% FS/psi
Leak Rate Under Vacuum: less than 10^⁻9 cc He/s
Operating Pressure, Max: 500 psi
Operating Pressure, Min: 0 psi
Process Connection Size: 1/4 in
Process Connection Type: Compression Fitting
Temperature Coefficient: 0.15% FS/°C
Volumetric Flow Rate, Max: 10 SLM
Volumetric Flow Rate, Min: 0.1 SCCM
Operating Temperature, Max: 50 °C
Operating Temperature, Min: 5 °C
