Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Accuracy: ± 1 %
Compliance: CE
Calibration: NIST Certificate
Display Type: None
Accuracy Note: For units with full range less than 100 SLM ± 1% FS, including linearity over 15 to 25°C (59 to 77°F) and 0.7 to 4.2 kg/cm² (10 to 60 psia). For units ≥ 100 SLM Full Range: ± 1.5% FS, including linearity over 15 to 25°C (59 to 77°F) and 0.7 to 4.2 kg/cm² (10 to 60 psia) from 20 to 100% of range; ± 3% FS from 0 to 20% of range
Control Valve: Solenoid Valve
Output Detail: Linear 0 to 5 Vdc: 1000 V minimum load 4 to 20 mA: 50 to 500 V loop resistance, ± 20 mV max noise
Output Signal: Current, Voltage
Repeatability: ± 0.5%
Response Time: 5 sec
Humidity Range: 0 to 70% RH
Supply Current: Up to 800 mA
Supply Voltage: 12 to 15 Vdc
Turndown Ratio: 40:1
Electrical Output: 4 to 20 mA, 0 to 5 Vdc
Enclosure Ratings: Inst. Level II/Poll. Degree II (IEC 60664)
Materials, Wetted: 316 Stainless Steel, Anodized Aluminum, Brass, FKM
Pressure Drop, Max: 50 psi
Response Time Note: 5 seconds to within ± 2% of set flow rate over 25 to 100% FS
Media Compatibility: Air, Gases, Nitrogen, Oxygen
Altitude Sensitivity: Horizontal flow path, no shift in calibration up to +20 degree pitch
Pressure Coefficient: 0.01% FS/psi
Leak Rate Under Vacuum: less than 10^⁻⁷ cc He/s
Operating Pressure Note: 35 kg/cm² gage (500 psig); 70 kg/cm2 gage (1000 psig) for ranges up to 100 SLPM. 1.76 kg/cm (25 psig) optimum
Operating Pressure, Max: 1000 psi
Operating Pressure, Min: 0 psi
Process Connection Size: 1/4 in
Process Connection Type: Compression Fitting
Temperature Coefficient: 0.15% FS/°C
Volumetric Flow Rate, Max: 5 SLM
Volumetric Flow Rate, Min: 0.25 SCCM
Operating Temperature, Max: 50 °C
Operating Temperature, Min: 5 °C
Material Construction Option: Aluminum and Brass Body
material-construction-option: Aluminum and Brass Body
