OMEGA MMG10WV10P4D0T2A2P Highly Configurable, High Accuracy, Custom Pressure Transducers (Gauge, 0.361 psi, NPT Female, 1/4 in)

Shock: 50 g, 11 ms half sine (under test)

Weight: 285 g

Accuracy: ± 0.2 %

Bandwidth: DC to 1 kHz

Stability: ± 0.1%

Vibration: ± 20 g

Cable Length: 2 m

Output Signal: Voltage

Pressure Type: Gauge

Pressure, Max: 0.361 psi

Pressure, Min: 0 psi

Response Time: <1 ms

ADC Resolution: None

Burst Pressure: 1000 psi Maximum

Proof Pressure: 10x Full Scale up to 1000 psi

Stability Note: Long Term Stability (1-Year): ± 0.1% FS typical.

Supply Voltage: 15 to 30 Vdc

Pressure Cycles: 1 million, minimum

Trim Pot Access: O-ring sealed screws on side cover

Electrical Output: 0 to 10 V

Enclosure Ratings: IP67

Materials, Wetted: 316L Stainless Steel

Supply Power Note: 15 to 30 Vdc @ 10 mA

Zero/Balance Error: ± 0.5% FS typical ± 1 max

Media Compatibility: Air, Alkaline solutions, Any, Argon, Carbon dioxide, Dilute Acids, Gases, Helium, Hydraulic Oil, Hydrogen, Light Oil, Liquids, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Steam, Water, Water-based fluids

Electrical Connection: Cable

Insulation Resistance: 100 MΩ @ 50 Vdc

Process Connection Size: 1/4 in

Process Connection Type: NPT Female

Zero/Balance Error Note: ± 0.5% FS typical ± 1 max (for ranges ≤2.5 psi ± 1% typ. ± 2% max)

Operating Temperature, Max: 121 °C

Operating Temperature, Min: -45 °C

Compensated Temperature, Max: 93 °C

Compensated Temperature, Min: -18 °C

Span Setting Adjustable Range: ± 10% span

Zero Setting Adjustable Range: ± 10% span

Thermal Effect on Zero error, Max: ± 0.8% FS

Datasheet