Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Current peak: 0.2～2kA
Stored energy: 60kJ
Charging voltage: 20kV
Equivalent output impedance: 20Ω,10Ω
DUT residual voltage: 6kV, 20kV
Supply mains: AC220V 50A
Installation: Frame style
Item: 2ms square wave current
Output peak: 1KA，2KA，3KA，4KA，5KA
Td duration: 2ms（-0%﹢20%）
Attenuation time: ＜Td×1.5
Reversed overshoot: --
Wave-front oscillatory: ＜5%
Voltage polarity: +/-,（Switch automatically）
Waveform switch: Switch automatically
Charging time: 10s~999s
Instability of charging voltage: Less than 1%
Trigger mode: Automatic or manual, single trigger available
Trigger malfunction rate: Less than 1%
Trigger range: 100% rated charging voltage
Display screen: 10 inch TFT color touch screen
Measurement display resolution: Better than 3%
Type of DUT: MOV, TVS, GDT, SPD or mains surge protection device
DUT residual voltage: ＜5kV
Current measurement（optional): Internal test box, Roosevelt coil measurement, BNC output
Voltage measurement（optional): Internal test box, resistive voltage divider, BNC output
Oscilloscope: MDO3012, optional
Insulation strength: ≤500V RMS（common port COMMON to ground reference PE）
- General data:
Power supply: AC220V±10%，50/60Hz，10A
Temperature: -10~+40℃
Humidity: 35%~85%RH（no condensation）
Ground resistance: No more than 0.5Ω
Construction: Open style, control system split base system
Size of test room: Depend on model（base system) +3M*5M（control system）
Operation table: 1.8M（width）*1.1M（height）*1M（depth）
No conductive dust, no fire or explosion danger, no corrosive metal and insulation air. Waveform of mains voltage is sine wave. The THD is <5%.
