Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Input
Input range: 90 - 264 Vac; 120 - 300 Vdc
Frequency: 47 - 63 Hz
Inrush current: 50 A max., cold start @ 25°C
Efficiency: 88% typical at full load
EMI/RFI: FCC Class B conducted; CISPR22 Class B conducted; EN55022 Class B conducted; VDE0878PT3 Class B conducted
Safety ground leakage current: 275 μA @ 50/60 Hz, 264 Vac input
Output
Maximum power: 100 W for convection (80 W for LPS102-M); 150 W with 30 CFM forced air (120 W for LPS102-M)
Adjustment range: ± 10% minimum on the main outputs
Fan output: 12 V @ 1 A isolated, ± 10%
Hold-up time: 10 ms @ 150 W load, 120 Vac input
Overload protection: Short circuit protection on all outputs. Case overload protected @ 110-160% above rating
Overvoltage protection: 15-35% above nominal output
Logical Control
Power failure: Open collector logic signal goes high 100-500 msec after main output; it goes low at least 6 msec before loss of regulation
Remote sense: Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected.
Environmental Specifications
Operating temperature: 0° to 50°C ambient derate each output as 2.5% per degree from 50° to 70°C. (-20°C startup)
Storage temperature: -40°C to +85°C
Electromagnetic susceptibility: Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3
Humidity: Operating; non-condensing 10% to 95% RH
Vibration: IEC 60068-2-6 to the levels of IEC721-3-2
MTBF calculated: 534.000 hours at full load and 25 °C ambient conditions, 230 V input, Bellcore
Ordering Information
Output Voltage: 15V
Minimum Load: 0 A
Maximum Load with Convection Cooling: 6.7 A
Maximum Load with 30CFM Forced Air: 10 A
Peak Load: 11 A
Peak Load: ± 2%
Ripple P/P (PARD): 150 mV
