Bevs BEVS 2209 Automatic Bond Strength Tester (0.2-0.4 Mpa/s)

Resolution: 0.01Mpa (1psi)

Display panel: capacitive touch screen

Power supply: Built-in replaceable rechargeable battery

Host dimension: L280 x W90 x H165mm

Three-point dimension: L148 x W148 x H238mm

Net wight: 10kg

Accuracy: ±1% of full scale

Built-in multiple dollies for selection: 40 x 40mm, 50 x 50mm, 45 x 95mm, 100 x 100mm

Unit: Mpa, psi

Pulling rate: 0.2-0.4Mpa/s, depending on dolly

Charging adapter: DC12.6V, power: 65W

Introduction

BEVS 2209 Automatic Bond Strength Tester is used to test the bond strength of materials, such as exterior wall facing tiles, mosaics, exterior wall insulation materials, various boards, paints and other materials bonded to the wall or the ground, concrete etc. The instrument is a small automatic hydraulic force measuring device. When testing the bonding strength, the pull-off test is automatically performed on the surface through the three-point stand.

Features

Large touch screen operation

Built-in rechargeable battery

Automatic test

Maximum pulling force can be set

Test force value and holding time can be set

Automatically stop when the set force is reached

Strength up to 10Mpa for dolly/test block 50 x 50mm

Can set a fixed pulling rate

Adjust the pulling angle through the foot screw

Data save and quick view

USB transfer data

4 different sizes of test block/dolly for selection

Real-time display of measurement data and curve

Real-time display of pulling rate

Real-time display of environment temperature and humidity

Auto reset when test done

Order Info

BEVS 2209 Automatic Bond Strength Tester

Datasheet