Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
-Power Supply:
(6.5 – 7.5) VDC / 1A
Plug: 5,5 / 2,5 mm / 10 mm
-Detector interface: 8 BNC sockets
-Trigger: CMOS level (0/5V) / BNC socket, internal pull-up 10 k to + 5 V
-Analog output:
± 2.5 V (max. + - 5 V), Ri = 100 R, max. Current = 2 mA, BNC socket
-Inputs: Amperes, optical units corresponding to calibration data, factor, percent, log (depends on the measurement quantity)
-Measurement range: 8 (2.000 mA to 0.1 pA) manual or autorange
-CW integration time: 1 ms – 999.999 s
-Pulse trigger:
Key run / stop
for all channels (channel 1 – channel 8)
rising edge or trailing edge
-Pulse integration time: 1 ms – 999.999 s
-Pulse pre trigger time: 0 ms – 400 ms
-Offset: Correction range transcending
-Parameter adjustment: Remote control or front panel keys (menu), adjusted values permanently stored (EEPROM)
-Calibration information:
Stored in EEPROM
max. 20 detectors (each 80 entries, e.g. wavelength, interpolation between the entries), manual calibration factor (keys) E (illuminance) and Ø (total flux) each with one calibration entry
-Logger memory: Max. 5957 entries each channel, stored in RAM
-Front panel control: 16 keys, menu system
-Interface:
RS232: 600 – 57600 Baud, 8 Data Bit, 1 Stop Bit, No Parity, Connector DSUB 9pins, female
IEEE488: AH1, SH1, L4, T4
-Dimensions: 280 mm x 250 mm x 70 mm
-Temperature range:
Operating: (5 to 40)°C
Storage: (-10 to 50)°C
-Humidity: <80%, non-condensing
-Accessories:
Power Supply: 230 VAC / 7 VDC / 1.2 A or 120 VAC / 7 VDC / 1.2 A
