Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Measurement principle:
DO: Phosphorescence
Temperature: Thermistor
Range:
DO Concentration: 0 to 425 μmol L^-1. Air saturation: 0 to 200% (calibration range: 0 to 120%)
Temperature: -3 to 45 °C (calibration range: 0 to 35 °C)
Resolution:
DO: 0.01 μmol L^-1
Temperature: 0.001 °C
Initial accuracy:
DO: ±2% of measured value or ±2.0 μmol L^-1 (calibraƟon range: 3 to 30 °C)
Temperature: ±0.01 °C
Repeatability
DO
Sample-based drift: ±5% of measured value or ±5.0 μmol L^-1 / 4.000.000 samples
Pressure effect: ±2% of measured value or ±2.0 μmol L^-1
Temperature effect: ±2% of measured value or ±2.0 μmol L^-1
Response time (63%) (at 25 °C. typical)
DO < 1 s (in water)
Temperature < 1 s (in water)
Representative output parameters: DO in μmol L-1. Temperature in °C. Engineering values of DO and temperature. Number of LED emission times. etc.
Sampling interval: 1s (shorter interval at request)
Pre-heat time: 5s (shorter time at request)
Communication: RS-232C or UART (3.3 V logic)
Communication protocol: Baud rate: 38400 bps. No parity. Handshake
AD Converter: 16 bit digital conversion
Power: 6 to 26 VDC. 12 VDC recommended
Current drain (at 12 VDC. typical): Operation mode: < 30 mA. Sleep mode: < 0.1 mA
Material: Housing: Titanium (Ti-6Al-4V)
Connector: Impulse MCBH-8-MP (5 8-pin LEMO )
Dimensions:
Weight: In air: approx. 265 g
In water: approx. 175 g
Depth rating: 6,700 m depth equivalent
