Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Rated output (0°C ~ 40°C):
Voltage: 0~31V
Current: 0~10.5A
O.V.P: 0.1~34V
O.C.P: 0.1~12A
Constant Voltage Operation:
Line regulation: ≤ 0.01% + 4mV
Load regulation: ≤ 0.1% + 5mV
Ripple & Noise: 2mVrms, 30mVpp (20Hz~20MHz)
Recovery time: ≤ 1.5ms (50% load change)
Constant Current Operation:
Line regulation: ≤ 0.1% + 3mA
Load regulation: ≤ 0.1% + 5mA
Ripple & Noise: ≤ 10mArms
Display:
Voltmeter: 5 digits LCD display
Ammeter: 5 digits LCD display
Setting resolution: 1mV/1mA
Reading resolution: 1mV/1mA
Setting accuracy:
Voltage: ±(0.03% of reading + 10mV) (25±5°C)
Current: ±(0.1% of reading + 0.1% of FS) (25±5°C)
Reading accuracy:
Voltage: ±(0.02% of reading + 5mV) (25±5°C)
Current: ±(0.1% of reading + 0.1% of FS) (25±5°C)
General Protection:
Panel lock: Over load, over voltage, over current, over temperature, and reverse polarity protections provided
Remote Sensing Function: 5% of FS
RS-232 interface: Optional USB device interface for PC remote control
Support: SCPI commands, support Labview
Interface: 0-5V analog control interface
USB host interface: For data storage and recall from external USB flash drive
Memory: Optional RS-485 interface: 300 sets internal save, support save to USB flash drive
Insulation:
Between base and terminals: ≥20ΜΩ/500VDC
Between base and AC power cord: ≥30ΜΩ/500VDC
Operating environment:
Storage environment: 0°C~40°C, ≤80%RH
Power source: -10°C~70°C, ≤70%RH
Accessories:
AC220V±10%, 50/60Hz:
Dimension: 215x89x352mm
Power cord x1, Operation manual x1, RS-232 cable x1, Software CD x1
Weight: 4.5kg
Product Introduction
This is a high accuracy programmable DC power supply with single output. With easy connection to computer via RS-232 interface, this power supply satisfies users’ demand for auto-testing and auto-control.The software commands are fully complied with the SCPI commands, it is convenient for user to proceed auto-tested and auto-controlled application program. Also, the digitalization of system makes a speedy, precise and convenient input of information controlled by keyboard. The adjustment of voltage/current is made by software calibration without manual error that will increase the preciseness of the instrument.
Features
▪ High accuracy, high resolution 1mV/1mA
▪ 4.3 inches TFT LCD display
▪ Over load, over voltage, over current, over temperature and reverse polarity protections
▪ CV and CC operations, auto CV and CC switch
▪ High speed rotary dial and keypad input
▪ Built-in beeper alarm
▪ Panel lock and output ON/OFF function
▪ 300 sets save & recall for voltage, current and time setups, easy use in auto test
▪ Timing output function and support infinite and specified number of cycles of output
▪ Displays load resistance, with low resistance measurement function
▪ Remote sense function
▪ Smart cooling fan achieving low noise
▪ Battery charge function
▪ USB host interface for data storage and recall from external USB flash driver
▪ RS-232 interface for PC remote control
▪ Supports SCPI commands, support Labview
▪ Analog control interface
▪ RS485 interface (optional)
▪ Compact design, light weight
