Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Vertical System |
|
| Rise Time (typical, 10-90%, 50 Ω) | 1 ns (typical) |
| Bandwidth | 350 MHz |
| Analog Bandwidth (Max) | 350 MHz |
| Analog Bandwidth @ 50 Ω (-3 dB) (1.85mm Inputs) | Not Applicable |
| Analog Bandwidth @ 50 Ω (-3 dB) (2.4/2.92mm Inputs) | Not Applicable |
| Analog Bandwidth @ 50 Ω (-3 dB) (ProLink Input) | Not Applicable |
| Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) | 350 MHz (≥1 mV/div) |
| Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) | 350 MHz (typical) |
| Input Channels | 4 |
| Bandwidth Limiters | 20MHz, 200MHz |
| Input Impedance | 1 MΩ ± 2.0% || 15 pF, 50 Ω ± 2.0% |
| Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Maximum Input Voltage | 50 Ω: 5 Vrms, 1 MΩ: 400 V max (DC + Peak AC ≤ 10 Khz) |
| Channel-Channel Isolation | > 1000:1 up to rated BW |
| Vertical Resolution | 12-bits |
| Sensitivity | 50 Ω: 1 mV–1 V/div, fully variable; 1 MΩ: 1 mV–10 V/div, fully variable |
| DC Gain Accuracy | ±(0.5%) Full Scale, offset at 0 V |
| Offset Range | 50Ω +/-1.6V: 1mV/div-4.95mV/div +/-4V: 5mV/div-9.9mV/div +/-8V: 10mV/div-19.8mV/div +/-10V: 20mV/div-1V/div 1MΩ +/-1.6V: 1mV/div-4.95mV/div +/-4V: 5mV/div-9.9mV/div +/-8V: 10mV/div-19.8mV/div +/-16V: 20mV/div-100mV/div +/-80V: 102mV/div-198mV/div +/-160V: 200mV/div-1V/div +/-400V: 1.02V/div-10V/div |
| Offset Accuracy | +/-(1.0% of offset value + 0.5%FS + 0.02% of max offset + 1mV) |
Horizontal System |
|
| Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input |
| Time/Division Range | 20 ps/div - 5 ks/div with standard memory (up to 10 ks/div with -L memory, 25 ks/div with -XL memory) RIS available at ≤ 10 ns/div; Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s |
| Clock Accuracy | +/-2.5ppm for 5 to 40C + 1.0ppm/year from calibration |
| Jitter Noise Floor | 700fs |
| Sample Rate and Delay Time Accuracy | Equal to Clock Accuracy |
| Trigger and Interpolator Jitter | ≤ 3.5 psrms (typical) <0.1 ps="" sub="">rms (typical, software assisted) |
| Channel-Channel Deskew Range | ±9 x time/div. setting, 100 ms max., each channel |
| External Timebase Reference (Input) | 10MHz +/-25ppm at 0 to 10dBm into 50Ohms |
| External Timebase Reference (Output) | 10MHz 2 +/-1 dBm sinewave synchronous to scope timebase |
| External Clock | Input on Aux In DC-100MHz Samples on Rising Edge Threshold range: ECL, TTL, 0 ECL:Threshold:-1.3V, Amplitude>=150mV P-P TTL: Threshold:+1.6V, Amplitude >=1.8V P-P 0V: Threshold: 0V, Amplitude>=150mV P-P |
Acquisition System |
|
| Sample Rate | 2.5 GS/s on 4 Ch |
| Single-Shot Sample Rate/Ch | 2.5 GS/s on 4 Ch |
| Random Interleaved Sampling (RIS) | 125 GS/s, user selectable for repetitive signals (20 ps/div to 10 ns/div) |
| Maximum Trigger Rate | 1,000,000 Triggers/sec (in Sequence Mode, up to 4 channels) |
| Intersegment Time | 1 usec. |
| Memory Options (4 Ch / 2 Ch / 1Ch) | L- Option: 100M / 100M / 100M (60,000) XL - Option: 250M / 250M / 250M (65,000) |
| Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 50M/50M/50M (30,000) |
| Maximum Acquisition Memory Points/Ch (4 Ch / 2 Ch) | 250 Mpts on all 4 channel |
Vertical System |
|
| Rise Time (typical, 10-90%, 50 Ω) | 1 ns (typical) |
| Bandwidth | 350 MHz |
| Analog Bandwidth (Max) | 350 MHz |
| Analog Bandwidth @ 50 Ω (-3 dB) (1.85mm Inputs) | Not Applicable |
| Analog Bandwidth @ 50 Ω (-3 dB) (2.4/2.92mm Inputs) | Not Applicable |
| Analog Bandwidth @ 50 Ω (-3 dB) (ProLink Input) | Not Applicable |
| Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) | 350 MHz (≥1 mV/div) |
| Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) | 350 MHz (typical) |
| Input Channels | 4 |
| Bandwidth Limiters | 20MHz, 200MHz |
| Input Impedance | 1 MΩ ± 2.0% || 15 pF, 50 Ω ± 2.0% |
| Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Maximum Input Voltage | 50 Ω: 5 Vrms, 1 MΩ: 400 V max (DC + Peak AC ≤ 10 Khz) |
| Channel-Channel Isolation | > 1000:1 up to rated BW |
| Vertical Resolution | 12-bits |
| Sensitivity | 50 Ω: 1 mV–1 V/div, fully variable; 1 MΩ: 1 mV–10 V/div, fully variable |
| DC Gain Accuracy | ±(0.5%) Full Scale, offset at 0 V |
| Offset Range | 50Ω +/-1.6V: 1mV/div-4.95mV/div +/-4V: 5mV/div-9.9mV/div +/-8V: 10mV/div-19.8mV/div +/-10V: 20mV/div-1V/div 1MΩ +/-1.6V: 1mV/div-4.95mV/div +/-4V: 5mV/div-9.9mV/div +/-8V: 10mV/div-19.8mV/div +/-16V: 20mV/div-100mV/div +/-80V: 102mV/div-198mV/div +/-160V: 200mV/div-1V/div +/-400V: 1.02V/div-10V/div |
| Offset Accuracy | +/-(1.0% of offset value + 0.5%FS + 0.02% of max offset + 1mV) |
Horizontal System |
|
| Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input |
| Time/Division Range | 20 ps/div - 5 ks/div with standard memory (up to 10 ks/div with -L memory, 25 ks/div with -XL memory) RIS available at ≤ 10 ns/div; Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s |
| Clock Accuracy | +/-2.5ppm for 5 to 40C + 1.0ppm/year from calibration |
| Jitter Noise Floor | 700fs |
| Sample Rate and Delay Time Accuracy | Equal to Clock Accuracy |
| Trigger and Interpolator Jitter | ≤ 3.5 psrms (typical) <0.1 ps="" sub="">rms (typical, software assisted) |
| Channel-Channel Deskew Range | ±9 x time/div. setting, 100 ms max., each channel |
| External Timebase Reference (Input) | 10MHz +/-25ppm at 0 to 10dBm into 50Ohms |
| External Timebase Reference (Output) | 10MHz 2 +/-1 dBm sinewave synchronous to scope timebase |
| External Clock | Input on Aux In DC-100MHz Samples on Rising Edge Threshold range: ECL, TTL, 0 ECL:Threshold:-1.3V, Amplitude>=150mV P-P TTL: Threshold:+1.6V, Amplitude >=1.8V P-P 0V: Threshold: 0V, Amplitude>=150mV P-P |
Acquisition System |
|
| Sample Rate | 2.5 GS/s on 4 Ch |
| Single-Shot Sample Rate/Ch | 2.5 GS/s on 4 Ch |
| Random Interleaved Sampling (RIS) | 125 GS/s, user selectable for repetitive signals (20 ps/div to 10 ns/div) |
| Maximum Trigger Rate | 1,000,000 Triggers/sec (in Sequence Mode, up to 4 channels) |
| Intersegment Time | 1 usec. |
| Memory Options (4 Ch / 2 Ch / 1Ch) | L- Option: 100M / 100M / 100M (60,000) XL - Option: 250M / 250M / 250M (65,000) |
| Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 50M/50M/50M (30,000) |
| Maximum Acquisition Memory Points/Ch (4 Ch / 2 Ch) | 250 Mpts on all 4 channel |
