Live Webinar: Speed Up Your Production Test in Industrial 4.0

Many semiconductor and electronic device tests involve sourcing a voltage and measuring a current as quickly as possible.

Many semiconductor and electronic device tests involve sourcing a voltage and measuring a current as quickly as possible. Overall test time is a function of charge time, measure time, and discharge time, as well as the time to setup and process the test.

When a typical test program executes from a PC controller, it continually communicates back and forth with the test instrumentation. This communication time, whether it is over GPIB, LAN, USB, or some other protocol, is often one of the largest contributors to slower test times. Embedded test scripts minimize this communication time by storing and then executing entire test programs directly from the instrument’s non-volatile memory. All setup, decision-making, and data storage is now done from inside the instrument itself, independent of the PC.

Join us to learn about, what is a SMU and TSP. Experience the speed and power of the Keithley SMU and TSP, helping you in the new world of Industrial 4.0

DATE: 2/9/2020, Wed

TIME: 2:00 PM (GMT+8)

Related News

10/22/2026 11:05:06

How Surface Gloss Affects the Perception of Color Intensity, And How to Measure It Accurately

Deciphering optical phenomena such as specular and diffuse reflection, distinguishing between SCI and SCE measurement modes, and providing guidance on using a combined colorimeter and glossmeter to accurately isolate color defects from surface gloss defects

10/21/2026 15:30:17

Plastic Products with Color Streaks: How to Adjust Back Pressure and Screw Speed? How Should Color Be Measured to Verify Proper Adjustment?

In the middle of the night shift, a batch of light-gray plastic emerged, streaked with debris. The machine operator took one look and did what came most naturally: he cranked up the screw speed and increased the back pressure to ensure the orange-colored pellets melted completely. By morning, the color was indeed more uniform. A few weeks later, the customer returned the entire shipment the products had become brittle, cracking at the slightest impact, and the color varied from one delivery to the next, failing to match the approved standard

10/20/2026 16:35:05

Controlling Color in Injection-Molded Products Using a Colorimeter: How to Correctly Interpret Delta E Values

Diagnosing the causes of plastic color variation, managing metamerism, distinguishing between SCI/SCE measurement modes, and applying Delta E standards for color deviation assessment in QA/QC

10/20/2026 15:07:44

EMIN & Fluke Thank You for Attending the Workshop on Optimizing Solar PV System Performance and Operational Safety

On the afternoon of October 19, 2026, the workshop “Solutions for Optimizing Performance and Ensuring Safe Operation of Solar PV Systems” was successfully held at Khanh Hoa College of Technology and Energy.

10/19/2026 16:28:49

What Do Cleanroom Differential Pressure Gauges Indicate, and How Do You Choose the Right Pressure Range (in Pa) to Pass Inspections?

Decoding differential pressure parameters according to EU GMP Annex 1 and ISO 14644 standards, interpreting HEPA filter/AHU clogging levels, and applying error calculation formulas to select precise measurement ranges for project handover