MITUTOYO HH-411 Hardness Testing Unit

Order code : 810-299-10

- Impactor : D type

in addition, compatibility probe with unit :

DC type : For inner walls of pipes (optional accessory)

D+15 type : For bearings and gears (optional accessory)

DL : For narrow features such as small gear teeth and welded corners (optional accessory)

- Range :

Leeb : 1-999HL, resolution : 1HL

Vickers : 43-950HV, resolution : 1HV

Brinell : 20-894HB, resolution : 1HB

Rockwell C : 19.3-68.2HRC, resolution : 0.1HRC

Rockwell B : 13.5-101.7HRB, resolution : 0.1HRB

Shore : 13.2-99.3HS, resolution : 0.1HS

Tensile streng : 499-1996MPa, resolution : 1MPa

- Function : Auto Angle Compensation Function, Offset function OK/NG judgment function, Conversion function Data storage function: 1800 data entries

Statistical analysis (Average, Maximum, Minimum, Dispersion) Auto sleep function, Impact counter display function

- Testable workpiece limits : Minimum 5mm or more in thickness and 5kg or more in mass (When the sample mass is 0.1kg or more and less than 5kg, fix it against a larger mass to make it testable.)

Test points: 5mm or more from the edge of the sample, 3mm or more to each of the tested points.

Surface roughness of samples: Ra 02µm or less

- Output : RS-232C

- Power supply : Alkaline AA battery 2pcs (battery life: approx. 70 hours) , AC adapter (optional accessory)

- Size / Mass : Display unit: approx. 70 x 110 x 35 mm, 200g , Impactor: approx. ø28 x 175 mm (tip : ø22mm), 120g

Standard : Battery AA x 2, Manual, Impact D, Hardness test block, werch, brush, Cable for detector

Optional accessories :

264-504 : Digimatic Mini- Processor DP-1VR

937387 : Connecting cable , For DP-1VR and display unit

09EAA082 : Printer paper , For DP-1VR 10 rolls / set

810-622 : Thermal printer , With a connecting cable for DPU-414

19BAA157 : Printer paper , For DPU-414 (TP411-28CL)

19BAA238 : Connecting cable , For PC and the display unit RS-232C (for DOS / V PC)

19BAA243 : Hardness test block : 880HLD (ø115mm, t33mm, 3.7kg)

19BAA244 : Hardness test block : 830HLD (ø115mm, t33mm, 3.7kg)

19BAA245 : Hardness test block : 730HLD (ø115mm, t33mm, 3.7kg)

19BAA246 : Hardness test block : 620HLD (ø115mm, t33mm, 3.7kg)

19BAA247 : Hardness test block : 520HLD (ø115mm, t33mm, 3.7kg)

19BAA248 : Support ring , For convex surface of cylinder (R10-R20)

19BAA249 : Support ring , For convex surface of cylinder (R14-R20)

19BAA250 : Support ring , For convex surface of sphere (R10-R27.5)

19BAA251 : Support ring , For concave surface of sphere (R13.5-R20)

19BAA457 : Carbide ball , For D, DC, D+15 type impactors

19BAA458 : Ball shaft , For DL type impactor

810-287-10 : Impactor UD-411 , D : approx.ø28 x 175mm, 120g (tip:ø22mm)

810-288-10 : Impactor UD-412 , DC : approx.ø22 x 85mm, 50g (tip:ø22mm)

810-289-10 : Impactor UD-413 , D+15 : approx.ø28 x 190mm, 130g (tip width 11mm)

810-290-10 : Impactor UD-414 , DL: approx.ø28 x 230mm, 140g (tip:ø4 mm)
06AEG302JA : AC adapter