Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Number of channels: 3
Output Type: Standard digital output + analog
Probe Configuration: single-ended probe(s)
Measurement Range : 0 to 12.5mm
Noise: 0.000001√Hz FSR
Repeatability : 0.000085% FSR (at a fixed point, 1 Hz bandwith)2
Minimum System Resolution : 0.100 nm
Long Term Stability/Drift : 20ppm /month or better at (±1° C)
Linearity Accuracy : ±0.01% FSR
Frequency Response : 5kHz
Output Data Rate : 100 min. to 20,000 max. (samples per second)
Temperature Stability 1: 00 ppm digital (over 0 to 40°C)
Butterworth Filter : 50, 100, 500, 1kHz, or 5kHz
Range Extension : 1x and 2x Default. Up to 10X max. optional (see probe charts for max probe range extension permissable)
ADC Bit Count : 24-bits
Exponential Filter : No Filtering, 0.1 , 1 or 10 Hz
Basic Interface : Command-Response, ASCII commands
Digital Output : Micro USB or RJ-45 Ethernet 10/100/1000
Analog Output Span : 0-5V (14 bit resolution), 0-10V(15 bit resolution), -10V to +10V (16 bit resolution), -5V to +5V (15 bit resolution)
Analog Output Impedance : 50 Ω, 5kHz, 5 pole Butterworth Low Pass Filter Limited
Encoder Input : 0-24VDC max, Threshold ~1.2 V, 32 bit, Z input/ reset input
Included Software : MTI Basic Software, LabVIEW, .NET, and DLL Drivers
Operating Temperature : 0 – 40°C, 95% non-condensing (designed); 20°C, 100kPa, 50%RH (nominal)
Operating Environment : IP40 (particles to 1mm/ no water protection)
Power Requirements : 24VDC±1V 50mV ripple, switching speed >60kHz. <8W estimated
Target Ground Return : Integrated with Power Connector
Input Protection : Reverse Polarity (Over Volt to 35VDC)
ESD Protection : ±4kV Contact and ±8kV Air
Case Dimensions : 2” (53mm) H × 4” (103mm) W × 4.7” (120mm) D
Case Mount : DIN Mount Kit
Probe Connectors : SMA Female
