Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Measurement Range: 0...25 %
Accuracy: +/- 0.02 % @ 1 %, +/- 0.01 % @ 0.1 %
Output Resolution: 0.01 %
Lower Detection Limit (LDL:) 0.02 % +/- 0.01
Response Time (T90): <20 seconds, typically 12 seconds
Operating Temperature Range: -20…+50 °C (-4…+122 °F)
Sample Flow Rate (application dependent)
Flow-through/extractive: 100...500 ml/min (250 ml/min optimal) in a vented atmosphere
Direct insertion: Up to 6 m/s
Life Expectancy (application dependent): 12 months
Humidity: 0...95 %rh non-condensing
Process Connection: Via Oxy Extract: 2” Tri-clamp/ANSI 150
Shelf Life: Up to 6 months
Calibration Interval (application dependent): 6...12 months
Electrical
Display: LCD
Output Signal: 4...20 mA
Digital Communication: RS485 (not SIL-capable)
Relay Output Options: 2 x configurable alarm relays, 1 x fault alarm relay, 1 x transistor
Power Supply: 24 V DC
Relay Contact Outputs RL1 / RL2 / Alarm
Switching power max.: 62.5 V A resp max. 30 W
Switching voltage: Um 125 V AC/110 V DC
Min. current 10 uA DC
Min. voltage 10 mV DC
According to IEC 947-5-1 resp. EN 60947
Transistor Output (DO): Switching parameters: < 28 V @ < 50 mA
Intrinsically Safe Connection
Voltage Uo = 6 V DC
Current intensity Io = 0.2 mA
Power Po = 0.3 mW
Max. outer inductivity Lo = 1000 mH
Max. outer capacity Co = 10 μF
Maximum Power Consumption: 1.5 W
Indicators: LCD and LED alerts on analyzer
Mechanical
Ingress Protection: IP20 enclosure
Housing Material: PBT
Mounting: 35 mm DIN rail
Cable Length: I.S sensor connection 5 m/10 m/15 m
