Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Accuracy: ± 1.5 %
K-Factor: 3785 pulses/gal
Materials: PEEK, Aluminum
Conductivity: 50 µS/cm
Current, Max: 26_ma_approx
Accuracy Note: ± 1.5% of reading ± 0.3% range
Output Detail: Amplified Square Wave
Output Signal: DC Pulse
Repeatability: ± 1%
Response Time: < 500 ms
Supply Voltage: 24 Vdc
Flange Diameter: 0.39 in
Flow Indication: LED Green
Load Resistance: 250 Ω
Sensor Diameter: 0.25 in
Enclosure Ratings: IP65, NEMA Type 4X
Materials, Wetted: EPDM, Stainless Steel
Number of Outputs: 1
Power Consumption: 150 mA
Supply Power Note: 24 Vdc ± 10%
Supply Power Type: DC
Media Compatibility: Acid Solutions, Conductive Liquids, Saltwater
Flow Indication Note: flow proportional blinking
Electrical Connection: M12 4 pin Female
Output Pulse Rate Note: Square wave signal NPN, internal pull-up resistor 2 kΩ pulse duty ratio 50:50
Operating Pressure, Max: 232 psi
Process Connection Size: 1/2 in
Process Connection Type: NPT Male
Short-Circuit Protected: < 30 V
Process Temperature, Max: 90 °C
Process Temperature, Min: 0 °C
Volumetric Flow Rate, Max: 7.93 GPM
Volumetric Flow Rate, Min: 0.13 GPM
Operating Temperature, Max: 70 °C
Operating Temperature, Min: 5 °C
Short-Circuit Protected Note: Measures short-circuit proof (up to 30V) and polarity protection (up to -30V)
