Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Weight: 6 lb
Accuracy: ± 0.75 %
Display Type: LCD
Supply Power: 10.5 to 42 Vdc
Accuracy Note: ±0.75% of Reading (Liquid) (±0.5% of Reading: Typical Accuracy/ Non-Guaranteed) ±1% of Reading (Gas, Steam)
Detector Type: Integral
Output Detail: Pulse output,alarm output and status output use the common terminal, therefore these functions are not used simultaneously. Output Signal (◇): Dual Output (Both Analog and Transistor contact output can be obtained simultaneously). In this case refer to the item “Remarks on installation” for power supply and pulse output wiring. Analog: 4 to 20 mA DC, 2-wire system. Transistor Contact Output*: Open collector, 3-wire system. Pulse,alarm,status output are selected by parameter setting. Contact rating: 10.5 to 30 V DC, 120 mA DC*1 Low level: 0 to 2 V DC. *1: 10.5 to 30 V DC. 80 mA DC for ATEX Intrinsically Safe Approval (/KS2) and IECEx Intrinsically Safe Approval (/SS2)
Pressure Type: Gauge
Repeatability: ±0.2%
Data Interface: BRAIN Communication
Mounting Plates: Flange
Electrical Output: 4 to 20 mA, Two 125 mA SPST SSR
Enclosure Ratings: IP67 Type 4X (IEC 60529)
Materials, Wetted: JIS SUS348
Enclosure Material: N/A
Data Interface Note: Communication Signal: BRAIN or HART communication signal (superimposed on a 4 to 20 mA DC signal) Note: HART is a registered trademark of the HART Communication Foundation. Conditions of Communication Line: Load Resistance:250 to 600 Ω(including cable resistance). Supply Voltage:16.4 to 42 V DC for digital communications BRAIN and HART protocols. (16.4 to 30 V DC for intrinsically safe type). BRAIN: Space from other Power Line: 15cm or more (Parallel wiring should be avoided.) Communication Distance: Up to 2 km,when polyethylene insulated PVC- sheathed cables (CEV cables) are used. Communication distance varies depending on type of cable used and wiring. Load Capacitance: 0.22 µF or less Load Inductance: 3.3 mH or less Input Impedance Communicating Device: 10 kΩ or more at 2.4 kHz.
Media Compatibility: Gases, Liquids, Steam
Electrical Connection: 1/2 NPS female Conduit with Screw Terminal block
Operating Pressure, Max: 412 psi
Process Connection Size: 1/2 in
Process Connection Type: ANSI Flange
Volumetric Flow Rate, Max: 26 GPM
Volumetric Flow Rate, Min: 4.13 GPM
Electrical Connection Note: In case of /FF1 or /CF1, CF11, /KF2, /KS2, /SF2, /SS2 the screw length is deeper than ANSI standard for 0.5 to 2 threads.
Operating Temperature, Max: 250 °C
Operating Temperature, Min: -29 °C
