Run Test RUN-SC02 High Voltage Switch Dynamic Characteristics Circuit Breaker Analyser

Type: Vacuum circuit breaker

Range (mm): 50

Type: SF6 Circuit breaker

Range (mm): 300

Resolution (mm): 0.1

Accuracy: 1%±1digit

Type: Minimum circuit breaker

Range (mm): 1000

Power Supply: 110V/60Hz

Air pressure: 86 ~ 106 KPA

Temperature: −10~40℃

Relative Humidity: ≤80%RH, non-condensing

Insulation Resistance: ≥2MΩ

Dielectric strength: 1.5KV withstand voltage to chassis for 1 minute, no flashover and arcing

Timing (Range 1): 250~4000ms, resolution: 0.1ms, accuracy: 0.1ms±1digit

Timing (Range 2): 10000~20000ms, resolution: 1ms, accuracy: 1ms±1digit

Speed: Range: 20.00m/s, resolution: 0.001m/s, accuracy: ±0.01m/s±1digit

Current: Range: 20A, Resolution: 0.01A, accuracy: 1%±0.1A

Output Power: DC5 ~ 270V digital adjustable 20A (instant)

Brief Introduction of the Circuit Breaker Tester (High Voltage Switch Analyzer)

This High Voltage Switch Analyzer can record and measure the closing bounce time, the number of bounces, the bounce process, and the bounce waveform of each fracture.

This tester can record and calculate the rigid points, rigidity, maximum speed, average speed, total travel, opening distance, over travel, rebound amplitude, time-travel characteristic curve.

This tester can record the opening / closing current value and current waveform of the opening / closing coil, and provides DC5 ～ 270V / 10A (20A) digital adjustable circuit breaker operation power supply, automatically completes the low voltage operation test of the circuit breaker, and measures the open circuit.

Switching Characteristic Analyzer Main features

1. Measure the inherent opening and closing time of 12-way metal fracture, time tolerance in same phase, time tolerance in different phase,close-open time and no flow time in process of close-open, open-close, open-close-open, closing bounce time,Some models can measure the pre-cast time of the closing resistance.

2. Record and measure the closing bounce time, bounce times, bounce process, and bounce waveform of each fracture.

3. Record and measure opening/closing speed, maximum speed, average speed, overall limit, clearance, overtravel limit switch,rebound amplitude, time-travel characteristic curve.

4. Record the opening/closing current value and current waveform of the opening/closing coil, and provides DC5-270V/10A (20A) digital adjustable circuit breaker operation power supply, automatically completes the low voltage test of the circuit breaker, and measures the operating voltage value of the device.

5. Simultaneously measure 6-way closing resistance value and its pre-casting time in some models.

Company Profile

We are a high-tech company which integrates R&D, production, sales and service of power equipments. We have been in electrical testing industry for many years, specializing in design, manufacture, and test service. We are a qualified supplier and service provider of State Grid in China.

Our products include partial discharge tester, transformer test series, insulation oil test series, hipot test series, Relay and Insulation test Series, Cable fault test series, and SF6 gas analyzer, etc.

Our company's products are widely used in many fields such as electric power, railways, machinery, petrochemicals, and are selected by many large transformer factories and petrochemical plants. The products have been exported to Southeast Asia, the Middle East, Africa, North America, Latin America, Europe and other regions. With the good quality products, competitive prices and excellent services, we have won a good reputation among customers abroad.

Run Test company adheres to the concept of "Easy Test" to make your test easier. Keep up with the pace of the times, continue to develop new products, enhance brand competitiveness, and meet all you needs. Try our best to provide you with the best quality products and services. We look forward to establish long-term cooperation with you.