SI ANALYTICS ProLab 2000 Multiparameter Instrument | EMINKH.COM

SI ANALYTICS ProLab 2000 Multiparameter Instrument

Name: SI ANALYTICS ProLab 2000 Multiparameter Instrument
Brand: SI ANALYTICS

ManufacturerSI ANALYTICS(View more products from this manufacturer)

ModelProLab 2000

Contact

Quantity

Secure Checkout

Quality Engagement

Easy change and return

Delivery Available

ModeL: ProLab 1000 (Order no. 285201710)
Manufacturer:SI ANALYTICS
Warranty: 12 months
Origin: Germany
pH measurement:
- Range / Accuracy: -2.000 … +20.000 pH / -2.00 … +20.00 pH/0.001 / 0.01 pH
- Accuracy (for each measuring area) (± 1 digit): ± 0.003 pH/± 0.01 pH
- Calibration: pre-programmed pH buffer sets: 22
- Automatic buffer recognition and display: Yes
- pH calibration points max: 5
mV measurement:
- Range/Accuracy - 1,999.9 to + 1,999.9 mV; - 1,999 to + 1,999 mV
- Accuracy (for each measuring area) (± 1 digit): ± 0.2 mV/± 1 mV
- AutoRange function (can be switched off): yes
ISE measurement:
- Range / Accuracy: 0.000 … 10,000 mg/l / 0.00 … 100.00 mg/l / 0.0 … 100.0 mg/l / 0 … 2000 mg/l
- Display in %, ppm, mg/kg, mol/l
- Two separate ISE channels (with dedicated separate temperature channels)
- Methods
- ISE calibration points: 2 to 3
- Standard concentrations:0.01 … 10 000 mg/l
- Control of external burettes TITRONIC® universal/ 110plus / 500.
Conductivity measurement:
- Range / Accuracy: 0.000 … 2.000 S/cm/0.00 … 20.00 S/cm/0.0 … 200.0 S/cm/0 … 2000S/cm/0.00 … 20.00 mS/cm/0.0 … 200.0 mS/cm … 0 … 2000 mS/cm
- Solution: 0.001 / 0.01 / 0.1 / 1 S/cm / 0.01 / 0.1 / 1 mS/cm
- Accuracy (± 1 digit): 0.5%
- Calibrated cell constant 0.450 to 0.500 cm-1; 0.585 to 0.715 cm-1; 0.800 to 1.200 cm-1(calibration with control standard) d 0.01 mol KCl:
- Adjustable cell constant 0.250 to 2.500 cm-1 and 0.090 to 0.110 cm-1
TDS measurement:
- Range/Accuracy 0 … 2000 mg/l/±1

One for all – pH, ISE, oxygen and conductivity with only one instrument

Up to four parameters can be measured and displayed at the same time. The selection of the parameters is menu-driven.

· Electrode and user identification – highest safety
Every stored measuring result shows the used ID-electrode and the user. The calibration data are stored in the ID-sensor. Therefore even when using multiple ID-electrodes on the same meter, the correct calibration data is always always chosen automatically.

· Professional measurement
With a measuring range from -2.000 to +20.000 pH and an accuracy of 0.003 pH, the automated calibration with up to 5 points (pH and ISE) and the automatic buffer recognition out of 22 buffer sets.

· The new combined sensor LFOX 1400 ID is included

A sensor with ID function for three parameters: conductivity, dissolved oxygen and temperature. The oxygen module can be easily removed and works according to the time-proven and reliable galvanic principle. Immediately ready for use, little maintenance required.
The conductivity sensor features the time-proven 4-electrode system.