Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Signal Channel:
Voltage inputs: Single-ended or differential
Sensitivity: 100 nV to 500 mV
Current input: 106 or 108 V/A
Input impedance:
Voltage: 10 MΩ+ 35 pF, AC or DC coupled
Current input: 1 kΩ to virtual ground
Gain accuracy: ±1 %
Gain stability: 100 ppm/°C (flat mode, normal reserve)
Noise (rms):
2.5 nV/√Hz at 1kHz
0.14 pA/√Hz at 1 kHz (106 V/A)
0.014 pA/√Hz at 100 Hz (108 V/A)
Signal filters(Tuneable from 0.2 Hz to 200 kHz):
Flat: Flat response to within ±1 % from 10 Hz to 100 kHz, ±2 % from 100 kHz to 200 kHz, and ±10 % below 10 Hz.
Band pass: Bandwidth adjustable from 1 % to 100 % of center frequency (Q from 100 to 1).
High pass: –12 dB/oct rolloff
Low pass: –12 dB/oct rolloff
Reference Channel:
Frequency range: 0.2 Hz to 200 kHz
Reference input: TTL or sine (100 mVpp min.)
Input impedance: 1 MΩ
Phase resolution: 0.01°
Phase accuracy:
±1° (2 to 20 kHz),
±5° (20 kHz to 200 kHz)
Harmonic detection: F, 2F and 3F (ext. ref)
Demodulator:
Output stability:
Low noise: 20 ppm/°C
Normal: 100 ppm/°C
High reserve: 1000 ppm/°C
Internal Oscillator:
Range: 0.2 Hz to 200 kHz
Outputs: Sine, square. (When using an external reference, output is phase locked to the external reference.)
Frequency accuracy: 0.1%
Frequency resolution: 3½ digits or 1 mHz (whichever is greater)
Amplitude: 1 µV to 20 Vpp into 10 kΩ, 50 Ω output impedance.
Amplitude stability: 50 ppm/°C
Inputs and Outputs:
Lock-In/AC Volt: Instrument can be operated as a lock-in amplifier or as a frequency selective AC voltmeter.
Output:
Lock-in:
X (Rcosθ), ±10 V
Y (Rsinθ), ±10 V, SR2124 only
AC Volt: ±10 V
General:
Power: 40 W, 100/120/220/240 VAC, 50/60 Hz
Dimensions: 17" × 5.25" × 19.5" (WHD)
Weight: 23 lbs.
