Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Sound Level Meter & Analyser:
Standards: Class 1: IEC 61672-1:2013, Class 1: IEC 61260-1:2014.
Weighting Filters: A, B, C, Z, LF, U, AU.
Time Constants: Slow, Fast, Impulse.
RMS Detector: Digital True RMS detector with Peak detection, resolution 0.1 dB.
Microphone: Microtech Gefell MK 255, 50 mV/Pa, prepolarised 1/2” condenser microphone.
Preamplifier: SV 12L detachable (TNC).
Linear Operating Range / Dynamic Range:
23 dBA RMS ÷ 140 dBA Peak (in accordance to IEC 61672-1:2013).
16 dBA RMS ÷ 140 dBA Peak (typical from noise floor to the maximum level).
Internal Noise Level: Less than 16 dBA RMS.
Dynamic Range: 110 dB.
Frequency Range: 3 Hz ÷ 20 kHz with Microtech Gefell MK 255.
Sound Level Meter Results:
Elapsed time; Lxy (SPL); Lxeq (LEQ); Lxpeak (PEAK); Lxymax (MAX); Lxymin (MIN);
where x: weighting filter A/B/C/Z; y: time constant Fast/Slow/Impulse;
LR (ROLLING LEQ option); Ovl (OVERLOAD); Lxye (SEL); LN (LEQ STATISTICS);
Lden; LEPd; Ltm3; Ltm5.
Measurement Profiles: Simultaneous measurement in three profiles with independent set of filters (x) and detectors (y).
Statistics: Ln (L1-L99), complete histogram in meter mode and 1/1 or 1/3 octave analysis.
Data Logger: Time-history logging of summary results and spectra with two adjustable logging steps down to 2 ms.
Analyser:
1/1 or 1/3 octave real-time analysis up to 40.0 kHz band meeting Class 1 requirements of IEC 61260-1.
FFT analysis: 1600 lines, up to 40.0 kHz band (optional).
RPM measurement: Rotation speed measurement parallel to vibration measurement (optional).
RT60: Reverberation time measurement (optional).
STIPA: Speech Transmission Index measurement and calculations (optional).
Audio Recording: Audio recording on trigger or continuous mode, 12 / 24 / 48 kHz sampling rate, wav format (optional).
Vibration Level Meter & Analyser:
Standards: ISO 20816-1.
Meter Mode: RMS, Max, Peak, Peak-Peak.
Measurement Profiles: Simultaneous measurement in three profiles with independent filter sets and detectors.
Filters: HP1, HP3, HP10, Vel1, Vel3, Vel10, VelMF, Dil1, Dil3, Dil10, Wh.
Accelerometer: SV 80 (100 mV/g) or any IEPE accelerometer (optional).
Analyser:
1/1 or 1/3 octave real-time analysis up to 40.0 kHz band meeting Class 1: IEC 61260-1.
FFT analysis: 1600 lines, up to 40.0 kHz band (optional).
RPM measurement: Parallel to vibration measurement (optional).
Data Logger: Time-history logging of summary results and spectra with two adjustable logging steps.
Time-domain Signal Recording: Continuous or triggered recording to WAV format (optional).
General Information:
Input: IEPE with TNC connector.
Memory: MicroSD card 32 GB, removable and upgradeable up to 128 GB.
Display: Blanview TFT-LCD 2.4” colour display, 320 x 240 pixels.
Communication Interfaces: USB-C, Bluetooth® 5.2, RS 232 (with optional SP 76).
External I/O: AC output 1 V Peak or Digital Input/Output (Trigger – Pulse).
Power Supply:
Four AA dry batteries, operation time > 12 h.
Four rechargeable AA batteries, operation time > 16 h (4.8 V / 2.6 Ah), not included.
External power supply: 6 V/500 mA DC ÷ 15 V/250 mA DC.
USB interface: Min. 500 mA HUB.
Environmental Conditions:
Temperature: -10 °C to 50 °C (14 °F to 122 °F).
Humidity: Up to 95 % RH, non-condensed.
Dimensions: 343 x 79 x 39 mm (with microphone and preamplifier).
Weight: Approx. 0.6 kg with batteries.








