Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Vibration Level Meter & Analyser
Standards: ISO 8041:2005, ISO 20816-1, DIN 4150-3, BS 7385-2
Meter Mode Results: RMS, VDV, MTVV or Max, Peak, Peak-Peak
Analyser (optional): 1/1 or 1/3 octave real-time analysis
FFT: 1600 lines with Hanning, Kaiser-Bessel or Flat Top window
FFT Cross Spectra Measurements: Available
RPM Rotation Speed Measurements: Parallel to vibration measurement (1 ÷ 99999)
Filters: Wd, Wk, Wc, Wj, Wm, Wb, Wg (ISO 2631), Wh (ISO 5349), HP1, HP3, HP10, Vel1, Vel3, Vel10, VelMF, Dil1, Dil3, Dil10, KB (DIN 4150)
RMS Detector: Digital True RMS detector with Peak detection, resolution 0.1 dB
Time Constants: From 100 ms to 10 s
Accelerometer (optional): SV 84 triaxial high sensitivity accelerometer for ground or building vibration measurements (1 V/g); SV 38 triaxial accelerometers for whole-body measurements (1 V/g MEMS type)
Measurement Range: Accelerometer dependent (with SV 84: 0.0005 m/s² RMS ÷ 50 m/s² Peak)
Frequency Range: 0.8 Hz ÷ 20 kHz; accelerometer dependent
Sound Level Meter & Analyser
Standards: Class 1: IEC 61672-1:2013
Meter Mode Results: SPL, Leq, SEL, Lden, LEPd, Overload time, Ltm3, Ltm5, LMax, LMin, LPeak
Measurement Profiles: Simultaneous measurement in three profiles with independent filters and detectors
Analyser (optional): 1/1 or 1/3 octave real-time analysis
FFT: 1600 lines with Hanning, Kaiser-Bessel or Flat Top window
FFT Cross Spectra Measurements: Available
Sound Intensity Measurements: Available
Weighting Filters: A, C, Z and G
RMS Detector: Digital True RMS detector with Peak detection, resolution 0.1 dB
Time Constants: Slow, Fast, Impulse
Microphone (optional): MK 255, Class 1, 50 mV/Pa, prepolarised 1/2” condenser microphone with SV 12L preamplifier
Measurement Range: Total Dynamic Range: 16 dBA RMS ÷ 140 dBA Peak; Linearity Range (IEC 61672): 26 dBA RMS ÷ 140 dBA Peak
Frequency Range: 0.5 Hz ÷ 20 kHz (microphone dependent; with MK 255 microphone: 3.5 Hz ÷ 20 kHz)
General Information Input
IEPE type (channels 1, 2, 3 – LEMO 4-pin & channel 4 – TNC connector)
Dynamic Range: 100 dB, 4 × 20 bits A/D converters
System Frequency Range: 0.5 Hz ÷ 22.4 kHz, sampling rate 48 kHz
Data Logger: Time-history logging to internal memory
Display: Super contrast (10000:1) OLED 2.4” colour display (320 × 240 pixels)
Memory: 32 MB non-volatile flash type
Interfaces: USB 1.1 Client, RS 232 (option: SV 55 required)
Extended I/O: AC output (1 V Peak) or Digital Input/Output (Trigger / Pulse)
Power Supply: Four AA alkaline batteries, operation time > 10 h (6.0 V / 1.6 Ah); Four AA rechargeable batteries (not included), operation time > 14 h (4.8 V / 2.6 Ah); SA 17A external battery pack (optional), operation time > 24 h
External Power Supply: 6 V DC ÷ 24 V DC (1.5 W)
USB Interface: 500 mA HUB
Environmental Conditions: Temperature from -10 °C to 50 °C (14 °F to 122 °F); Humidity up to 90 % RH, non-condensed
Dimensions: 140 × 82 × 42 mm
Weight: 510 grams with batteries (Approx. 2.00 lb)








