Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Product contents:
Thermoregulation part:SX-10N
Shakier part:Personal-11
Dimensions: 300 x 485 x 440Hmm
Weight: Approx. 19kg
Power Supply: AC100V 12A
Standard Accessory: Spring net shaking rack for Personal-11 x 1, poly C water bath x 1, micro tube floater x 1, clamp spacer x 1
Applicable Container / Number:
Test tubeφ11mm x 187 (hold vertically)
Centrifuge tube 50ml x 12 (tilt about 30º)
Erlenmeyer flask 100ml x 8
Erlenmeyer flask 200ml x 6
Erlenmeyer flask 250ml x 5
Erlenmeyer flask 300ml x 5
Erlenmeyer flask 500ml x 3
Details of Set Products
Model: SX-10N
Temperature range (*1): 5℃ above RT to +105℃
Settable temp. range (*2): -20℃ to +105℃
Temp. control accuracy (*3): ±0.05℃〜
Stirring method in Bath: Jet flow (Controllable)
Temperature memory: 1 pc
Timer: Buzzer notification for Preset time, Operation OFF, Temp. memory interlock (= Temp. transition timer, only for SX-10N) Setting range: 1 min to 99 h 59 min (Each model)
Other functions: Digital display (switching between setting temperature and inside chamber temperature)
Timer: Buzzer notification for Preset time, Operation OFF, Temp. memory interlock (= Temp. transition timer, only for SX-10N) Setting range: 1 min to 99 h 59 min (Each model)
Other functions: Buzzer notification when preset temp. is reached, Automatic tuning, Safety device output (SM-05N is excluded. Alarm out cable AOC-2 is required to output.)
Min. Water level: 55 mm from the bottom of the bath, 80 mm from the bottom of the bath
Heater: 1000 W (Time proportional output variable)
Safe devices/protectionsCircuit protector, Fuse, Dry-heating protection with float, Heater protection cover, Sensor error, Short circuit, High/Low temp. sample protection,Water level alarm, Nonvolatile memory error, Automatic tuning error, Alarm setting error
Power failure: Switchable Automatic/Manual recovery
Dimensions inside Bath(W×D×H): 130 × 66 × 135 mm
Main unit dimensions(W×D×H): 130 × 135 × 304 mm
Weight: Approx. 3.4 kg
Power supply/consumption: AC100V/10.5A (Need a step-down transformer), 41 Wh at 37℃ (*5)
Standard accessories: Microtube Floater × 1 pc, Plastic Water bath C-type × 1 pc (*7)
Datasheet
(*1)Max. temp. may not be reached when the optional Hood is not used or depending on the usage conditions. Recommended to use our specified Heat medium for High temp (See page 134) when using tap water at high temp. as dangerous due to the steam.
(*2)Not equipped with a cooling function. Can be used together with our Chiller/Coolnit, Immersion cooler, etc. at below RT (25℃). Use our specified Antifreeze fluid (Heat medium for Low temp. See page 134) when preset temp. is below 7℃. The usage life of the components may be shortened when used at the upper limit temp.
(*3)The value under the conditions of RT (25℃), AC100 V/50 Hz, Capacity 6 liters water, Preset temp. 37℃, and No heat load. For SX-10N, this is an actual measured value (0.01 unit).
