Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Power: 4KW
Furnace tube size(mm): Dia 120(OD) X1800mm
Dimension: 1800X460X660
Power supply voltage: 220V
Phase number: Single-phase
Control mode
1.Yudian temperature control: 30 sections can only use PID temperature regulation.
2.FP93 temperature control (from Japan)
Temperature control mode: Intelligent PID
Burnout protection and display: Yes
Over-temperature protection: Yes
Overcurrent protection: Yes
Control accuracy: +/- 1 ℃
Trigger: Phase-shift trigger
SCR: 106 / 16E Germany Simon Kang
The 1.2 temperature zone max temperature: 1200 ℃
The 1.2 temperature zone Rated temperature: 1150 ℃
Heating rate: ≤30 ℃ / Min (Available upon request modification)
Recommended heating rate: ≤15 ℃ / Min
Thermocouple Type: K type
The 1.2 temperature zone heating length: 205mm
Surrounding surface temperature: ≤45℃
Plasma RF Power
Power output range: 0-500W
Maximum reflected power: 10W
Signal frequency: 13.56MHZ ± 0.005%
Noise: <30 dB
Air cooling: cooling method
Input Power: 208-240V 50 / 60HZ
GX supply system main parameters
Standard range
Proton flow controller 5,10,20,30,50,100,200,300,500SCCM, 1,2,3,5,10SLM
(you can choose any scale)
Accuracy: ± 1.5%
Pressure drop: <0.01MPa
Repeatability: ± 0.2% F.S
Max Operating pressure: 3MP
VS-0.1 exhaust system
Power supply: 220V / 380V 380W
Pumping rate: 2L / S
Resistance vacuum gauge: ZDR-I
Vacuum measurement range: 0.1-10 5 Pa
Vacuum pump: VRD-8
Corrugated pipe: KF25X1000mm
Vacuum system: 10 -1Pa
