Yokogawa 96062 Clamp-on probe (100A)

Measurable conductor size:Max. φ24 mm

Measuring range:AC 0 to 100 Arms (141 A peak)

Output voltage:AC 0 to 500 mVrms (5 mV/A)

Accuracy (sine wave input):+ Band width:±0.5%rdg±0.1 mV( 50/60 Hz), ±1.0%rdg±0.2 mV (40 Hz to 1 kHz)

+ Phase:Within ±2.0 deg (at 1 A to 100 A, 45 Hz to 65 Hz)

Temperature & humidity range (guaranteed accuracy):23 ±5°C, 85%RH or less(no ondensation)

Rated voltage between circuit and ground:AC 300 Vrms Max.

Operating temperature & humidity range:0 to 50°C, 85%RH or less (no condensation)

Storage temperature & humidity range:-20 to 60°C, 90%RH or less (no condensation)

Temperature coefficient:In the range of 0 to 50°C and the amount of change from 23°C is ±0.5% rdg ± 0.1 mV or less

Maximum allowable input:AC 100 Arms continuous (50/60Hz)

Influence of the conductor location:Within ±0.5% rdg

Influence of the external magnetic field: 0.2 A equivalence or less (400 A/m, 50/60Hz)

Output impedance:Approx. 11 Ω

Withstand voltage:AC 3.51 kVrms / 5 s Between jaw and case, case and output terminal, output terminal and jaw.

Environmental condition:Altitude up to 2000 m, in-door use

Recommended calibration period:1 year

Dimension:60(W)×100(H)×26(D) mm (excluding projections)

Cable length:Approx.3m

Output terminal:MINI DIN 6PIN

Weight:Approx.160g

Accessory:Instruction manual, cable marker

Manual: